
28
Public Address - Voice Alarm
Public Address - Voice Alarm
Audio Distribution over IP
Commercial Audio
Intelligent Acoustic Solutions
Intercommunication
Loudspeakers
D-Class Amplifiers, modular
DPA 120 / DPA 240
DPA 120
1 x 120 Watt D-Class amplifier, modular
DPA 240
1 x 240 Watt D-Class amplifier, modular
The DPA series of amplifier modules comes in two versions:
120 and 240 Watt. Due to its design, 8 units can be put in
a special 4U/19“ rack frame the RKDPA. In the front of each
module, LED indicators are showing the following status:
- Power (AC/DC)
- Signal
- Fault
Gain adjustment and power-switch are positioned at the rear
of each amplifier module and meant for final adjustment
during commissioning. The D-Class design amplifier is
equipped with a self-regulating ventilator with variable speed
control to reduce power consumption.
The DPA-series of D-Class amplifiers are thoroughly modular. Individually equipped with an AC/DC supply
and industrial cases for higher immunity, these modules are design for industrial purposes and made for
fast replacements. The DPA-series of D-Class amplifier are ready to be housed in a quick-snap 4U, 8-slot
position 19-ich rack-frame.
DPA 120
• Nominal AC input voltage:
115 or 230, 50/60 Hz internally selectable
• Nominal DC input voltage: 24 V
• DC input voltage range: 21-28 V
• Idle power consumption on AC: 33 W
• Idle power consumption on DC: 2 W
• Power consumption, standby (AC): 57 W
• Power consumption, Max (AC): 230 W
• Continuous nominal output power: 120 W
• Overall efficiency (DC): 70%
• Frequency response (-3 dB): 30 - 20 KHz
• THD nominal power -3 dB @1 kHz 22 Hz – 22 kHz:
0,5%
• Output: 100 V
• Mains AC input socket: IEC-3
• DC input socket: PHOENIX PC 6-16/2-G1-10, 16
• Audio input socket: 3 pin PHOENIX 3.81 mm
• Size: L55 x H 178 x D 400 mm
• Net Weight: 3 Kg
• Color: Ral 7016
DPA CHARACTERISTICS
The RKDPA 4U/19“ rack frame can carry up to 8 x DPA120
or DPA240 amplifier modules. The modular concept ensures
quick parts replacement during service actions.
RKDPA / Stackable rack - 4U 19” for DPA
FBDPA / 1/8 Blindpanel
DPA 240
• Nominal AC input voltage:
115 or 230, 50/60 Hz internally selectable
• Nominal DC input voltage: 24 V
• DC input voltage range: 21-28 V
• Idle power consumption on AC: 33 W
• Idle power consumption on DC: 2 W
• Powerconsumption, standby (AC): 92 W
• Powerconsumption, Max (AC): 437 W
• Continuous nominal output power: 240 W
• Overall efficiency (DC): 70%
• Frequency response (-3 dB): 50 - 18 KHz
• THD nominal power -3 dB @1 kHz 22 Hz – 22 kHz:
0,5%
• Output: 100 V
• Mains AC input socket: IEC-3
• DC input socket: PHOENIX PC 6-16/2-G1-10, 16
• Audio input socket: 3 pin PHOENIX 3.81 mm
• Size: L55 x H 178 x D 400 mm
• Net Weight: 3 Kg
• Color: Ral 7016
Comments to this Manuals